Session Harness by Ocean Rodeo

In the design process for 2 years, the Session Harness is a mix of ideas and concepts from our experience kiteboarding, skydiving, and hang gliding.

If you have been unfortunate enough to have a harness fail while kiting, you will understand our mission to create the toughest, safest harness ever conceived.

Built with the same rugged construction and attention to detail as all Ocean Rodeo products, the Session Harness was designed to be super strong, while at the same time incorporating obvious safety requirements, currently ignored by our competitors. One day all harnesses will be built this way.

Construction:
One of toughest sewn products we could think of was the good old Hockey Skate. We looked at how hockey skates combined both stiff and soft fabrics to make a truly bomber product that was comfortable when worn under high loads.

Sewing:
Double buck stitch sewing all around.
Fabrics: heavy-duty ballistic nylons, seamless internal webbing power band that supports the hook attachment... everything is double sewn, reinforced and then attached to the internal power band. Rock solid!

Comfort:
Molded thermo foam padding against your body for maximum comfort.

Features:

Lock and Load Leg Holsters- Removable (patent pending)
Click here to view photo.

We've put the leg strap hinge point at the hip instead of the lower bum allowing the rider a huge range in leg motion. Unlike traditional harness leg straps that hinder your freedom, there is no leg restriction thanks to the side loading, lock and load leg straps.

Our unique leg strap attachment, (through a "port" located on the top edge of the harness) allows the rider a giant range in harness adjustment height, another first from Ocean Rodeo. Simply thread the clip through the port and clock in.
Click here to view photo.

Because of the "up high" leg strap, you have a huge range of adjustment on the harness height. Ride seat style (low) or waist harness height (mid), without the chance of the harness riding up.

Wear your leg straps inserted into the Session under short! Allowing you to wear your board shorts over the leg straps! It's all about style!

This unique high up leg strap port allows the rider to wear board shorts or pants over the leg straps when worn in combination with the Session Under Short, effectively hiding the straps. As well as looking good, covering the leg straps eliminates one more potential tangle spot for lines.

Click here to view session worn with leg straps hidden.
 

The leg straps can also be worn over dry suits and wetsuits without the internal shorts.
Click here to view photo.

Leg straps are completely removable so harness can also be worn just a waist harness.

Leash Quick Release

Click here to view photo.
 

Letting go of your kite with a leash connected to the back of your harness can be a sketchy move in some conditions. If things go wrong you now have the final option of releasing your leash from the back of the harness.

Simply pull the red eject handle next to the harness hook and you'll be free.

Handle Hold.
Elastic retracts grab to minimize catching.

Buckle Covers
We've made every attempt to cover all buckles and potential line tangle points with the buckle covers.

Hook Knife
Hook knife located on back top edge of harness. Cut your way out of a mess.

Velcro Wrap Entry.
Click here to view photo.
Sturdy elastic cummerbund with front Velcro closure.

Spreader Bar Pad.
The spreader bar is sandwiched onto a control pad with Velcro, allowing you to easily change hooks. This pad also helps to spread the hook's load.

Harness Sizes: S, M, L comes complete with leg straps.

Hook sold separately.

Shorts sold separately (S,M,L)